Posts Tagged ‘Cisco ZBF self zone’

Cisco Zone Based Firewall

November 5, 2012 6 comments

In this post I will talk about Cisco Zone Based Firewall (ZBF) which is a new approach to configure access control in the IOS firewall. I will first make an introduction to ZBF and then I will demonstrate how to configure it.

To illustrate the different examples in this post I will use the following topology:


 Platform/IOS: Cisco 2691/12.4(15)T11 Adv IP services.

 Side note: As I am using IOS 12.4(15)T I will only talk about ZBF rules for this IOS release. Some improvements and rules changes have been made in the last IOS releases (IOS 15.X).

 IP addressing: All routers in the topology are configured with loopback IP in the format X.X.X.X /32 where X is the router number.

Read more…